MCU |
STMicroelectronics Solution |
External Flash Memory |
32MB for Data buffer & debug log |
GPS |
QUECTEL GNSS Solution |
GPS Frequency |
L1 frequency (1575.42 MHz) |
GPS Antenna |
Built-in patch ceramics antenna |
Cellular Antenna |
Built-in Pi-Fa antenna |
Antenna Type |
Built-in patch ceramics antenna |
LTE Module |
GTR-391E : Europe
LTE Band 1, 3, 7, 8, 20, 28 (700, 800, 900, 1800, 2100, 2600 MHz)
WCDMA Band 1, 8 (900, 2100MHz)
GSM/EDGE Band 3, 8 (900, 1800MHz) |
Indicator LED |
Red/Green/Orange |
Communication Protocol |
TCP/HTTP/HTTPS/ SMS |
Transceiver Interface |
RS-232 / RS-485 / CANBus (Choose one of three) |
Back-up Battery |
820mAh rechargeable |
Sensor |
Normal mode:
Red blinking: Device is under booting and SIM-PIN not ready
Red solid: SIM PIN Ready but GSM not registered
Yellow solid: GSM registered, but GPRS not connected
Green solid: GSM registered, and GPRS connected
Hiding mode:
Red blinking: Device is under booting
After complete the boot, turn off all LEDs. |
Sensor |
G-sensor for Motion detect |
SIM Type |
Nano SIM or eSIM |
Button |
Reset (short press) |
Dimennsions |
65g / L107.5mm x W38.7mm x H22.8mm |
Operating Temperature |
-30°C~85°C
(Storage: -40°C~90°C / 5% ~95% Non-condensing) |
Certification |
TBD |
External GPS ANT |
MMCX or SMA Connector (HW reserve) |
8 pin I/O: |
Power Input:
1 - DC +12V ~ +24V
2
- GND
Ignition (ACC) Input
3
- Positive trigger
Digital Input
4
- Negative trigger (Option: Emergency button)
RS-232/RS-485/CANBus
5 - Transmission Input
6 - Transmission Output
7 - GND
|